Skip to content
BIKOM-SERVICE — official AntOn dealer in Ukraine

Blog

Practical writing about warehouse machinery: how to match a model to the job, what shortens a machine's life, and what downtime actually costs.

  • Choosing a machine

    Choosing a stacker: lift height and capacity

    A stacker's rated capacity applies with the forks at the bottom. Up high it falls — sometimes by half. Here is how to read the residual capacity chart, and how not to buy a machine that cannot reach your top shelf.

    2 min

  • Choosing a machine

    PSM 1.2 or PTL 1.5: when you need a stacker and when a pallet truck

    The two machines look alike and differ in one ability: a stacker puts a pallet on the racking, a pallet truck does not. Everything else follows from that, including the difference in price.

    1 min

  • Choosing a machine

    Three CBH configurations: V1, V2 and V3

    One forklift in three builds: basic, extended-life, and fully equipped for hard use. The difference is not in power but in how many hours a day the machine can take.

    1 min

  • Operation

    What downtime on warehouse equipment really costs

    The repair invoice is the smallest part of what a broken machine costs. Here is the full price of one day's downtime in a mid-sized warehouse.

    1 min

  • Operation

    What to check before you start a machine

    A short checklist for the start of a shift. It does not replace scheduled servicing, but it is what catches the things that otherwise turn into a service call-out.

    1 min

  • Company

    The AntOn dealer network: how to join

    AntOn by Jungheinrich is expanding in Ukraine. Here is what we expect from a partner, and what we provide in return.

    1 min